JLM-SH23_Germany Kule Accessories Co., Ltd

来自 : en.kule-kla.cn/product/...html 发布时间：2021-03-24

1) Side holes for aluminum milling: 15mm wide, 86mm long, square shaft hole s9mm, machine wire hole s6mm; 2) Put the lock box on the side of the washed aluminum material, tighten the hexagon socket buckle, and fix the lock box on the side of the aluminum material; 3) The handle square shaft is connected to the lock box, adjust the position of the lock box and the handle, and then connect the slide wire with a long wire 4) When the wire is passed through the lock box with the handle, use two wires to pull out the two sliding blocks: 5) When the inner space of the aluminum material is less than the length of the slider, pull out the slider directly and tighten the wire (the lock box is not biased at this time) 6) When the inner space of the aluminum material is longer than the length of the slider, you can use two wires to pull out the slider first, and then pull out the handle together with the wire slider, etc. After the slider reaches the inner wall of the aluminum material, tighten the screws inward. The slider and the aluminum material can be tightly fixed, and the handle will not loosen. Toward the handle, otherwise the slider will be in the opposite direction, which will cause it to be blocked by the lock box and cannot be pulled out)
JLM-SH23 Extended anti-theft lock box Center distance: 20, 25, 30, 35 Material: Zinc alloy How to use the lock box and precautions: 1) Side ...JLM-SH23,Germany Kule Accessories Co., LtdJLM-SH23-Germany Kule Accessories Co., Ltd-Extended anti-theft lock box<br> Center distance: 20, 25, 30, 35<br> Material: Zinc alloy<br>JLM